Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
76 E300 Design Guide
Issue Number: 1
4.6.3 Position feedback terminal specifications
1
A,F, Cosref, Data, Cos H
2
A\,F\ Cosref\, Data\, Cos L
AB (0), FD (1), FR (2), AB Servo (3), FD Servo (4), FR Servo (5)
Type EIA 485 differential receivers
Line termination components
120 Ω (selectable)
Working common mode range – 7 V to + 12 V
SC Hiperface (7), SC EnDat (9), SC SSI (11), SC Servo (12), SC SC (15)
Type Differential voltage
Maximum Signal level
1.25 V peak to peak (sin with regard to sinref and cos with regard
to cosref)
Maximum applied differential voltage and common mode voltage range
± 4 V
EnDat (8), SSI (10), BISS (13)
Type EIA 485 differential receivers
Line termination components
120 Ω (selectable)
Working common mode range – 7 V to + 12 V
Common to All
Absolute maximum applied voltage relative to 0V - 9 V to + 14 V
3
B, D, R Sinref, Clock, Sin H
4
B\, D\, R\, Sinref\, Clock\, Sin L
AB (0), FD (1), FR 2), AB Servo (3), FD Servo (4), FR Servo (5
)
Type EIA 485 differential receivers
Line termination components
120 Ω (selectable)
Working common mode range – 7 V to + 12 V
SC Hiperface (7), SC EnDat (9), SC SSI (11), SC Servo (12), SC SC (15)
Type Differential voltage
Maximum Signal level
1.25 V peak to peak (sin with regard to sinref and cos with regard
to cosref)
Maximum applied differential voltage and common mode voltage range
± 4 V
EnDat (8), SSI (10), BISS (13)
Type EIA 485 differential receivers
Line termination components
120 Ω (selectable)
Working common mode range – 7 V to + 12 V
Common to All
Absolute maximum applied voltage relative to 0V - 9 V to + 14 V
To Next Page
Loading...
