Emerson iPro Series - 4.2 IPRO.GENIUS (IPG200 D RANGE); 4.2.1 Description of the connections

1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 18/96
4.2 IPRO.GENIUS (IPG200D RANGE)
4.2.1 Description of the connections
Connector Description
Connector for 24Vac/dc power supply
Analogue inputs (Pb1 - Pb10, PbC)
Additional power (+5Vdc, +12Vdc, GND)
Opto-insulated analogue outputs (Out1 - Out6, GND)
24Vac/dc power supply for the opto-insulated analogue output
Potential free opto-insulated digital inputs (DI1 - DI20, DIC)
Opto-insulated 24Vac/dc digital inputs (DI1 - DI20, GND)
USB port for downloads (BIOS, ISaGRAF® application, maps of parameters, remote display
applications, network configuration, website) and uploads (log files)
TCP/IP Ethernet port
Connector for remote terminal (VISOGRAPH), maximum 2 terminals per iPRO.
CANBUS connector for expansions (IPEXx0D) and drivers for electronic valves (XEVx0D
Rx and Tx LED to indicate that communication is active
Line terminal (Term)
RS485 Slave connector
Rx and Tx LED to indicate that communication is active
Line terminal (Term)
RS485 Master connector
Rx and Tx LED to indicate that communication is active
Line terminal (Term)
Digital relay outputs (for digital outputs with potential free contacts)
3 NO relays, 1 common