Emerson iPro Series User Manual

1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 80/96
7.3.5 Pressure transducers and ratiometric pressure transducers (0 - 5V)
3-row sensors that require +5Vdc power supply.
Each sensor must be connected through one of the inputs (from Pb1 to Pb10) and the power supply
(+5V/GND) as shown in the diagram below.
IPG-IPC IPG-IPC 4 DIN
Recommendations:
- follow the diagram of the device used, for the numbering.
- the configuration is determined by the application.
7.3.6 Pressure transducers and ratiometric pressure transducers IPG800 Series (0 - 5V)
3-row sensors that require +5Vdc power supply.
Two sensors must be connected through one of the inputs (from Pb6 to Pb7) and the power supply
(+5V/GND) as shown in the diagram below.
Recommendations:
- follow the diagram of the device used, for the numbering.
- the configuration is determined by the application.

Emerson iPro Series Specifications

General

Brand	Emerson
Model	iPro Series
Category	Controller
Language	English