1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 55/96
4.9 IPX115D – IPX125D
4.9.1 Description of the connections
Connector Description
Connector for 24Vac/dc power supply
Analogue inputs (Pb1 - Pb10, PbC)
Additional power (+5Vdc, +12Vdc, GND)
Opto-insulated analogue outputs (Out1 - Out6, GND)
24Vac/dc power supply for the opto-insulated analogue output
Potential free opto-insulated digital inputs (DI1 - DI20, DIC)
Opto-insulated 24Vac/dc digital inputs (DI1 - DI20, GND)
LAN serial port connector
Rx and Tx LED to indicate that communication is active
Rx and Tx LED to indicate that communication is active
Dip-switch to set the address of the device.
3 NO relays + 1 changeover relay, 1 common
6 NO relays, 2 common
3 NO relays + 2 changeover relays, 3 common
To Next Page
Loading...
Need help?
General
