Emerson iPro Series User Manual

1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 66/96
4.10.3.6 Mechanical specifications
10 DIN module
4.10.3.7 Electrical specifications
Power Supply:
24Vac +10/-15%, 50/60Hz
20 - 36Vdc
Consumption:
20VA (Vac), 15W (Vdc)
Connectors:
Phoenix quick coupling connectors for low voltage
STELVIO 90° screw connectors for digital outputs (250Vac, 6A max)
4.10.3.8 Plastic container
Mount:
On a DIN rail (EN 50022, DIN 43880)
Fastened with screws via the removable plastic flaps.
Material:
PC-ABS Thermoplastic
Self-extinguishing:
V0 (UL94)
Comparative Tracking Index (CTI):
300V
Colour:
White
4.10.3.9 Setting the address of the device
The address of the device is set via a dip-switch and numbering is binary as shown in the table
below:
If the address is changed while the device is switched on, to confirm the new address
remember to switch off and switch on again the device.
Not used

Emerson iPro Series Specifications

General

Brand	Emerson
Model	iPro Series
Category	Controller
Language	English