Emerson Rosemount 3100 Series Reference Manual

157
Reference Manual
00809-0100-4840, Rev CB
Appendix F: Programming the 3102 and 3105 using HART
February 2015
Programming the 3102 and 3105 using HART
Rosemount 3490 Series Control Unit
To view or change the diameter,
maximum height, or power factor
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1: 3102”).
3. Select DUTY.
4. Select Profile Height.
5. Follow the on-screen instructions to edit and save the new setting.
(Use the Enter ( ) key if prompted to change mode to “off-line”).
6. Select “Quit” to exit to the previous menu.
Profile Height P014
1.0000ft
Esc=Quit =Edit
(Rosemount 3491 Screen Shown)

Emerson Rosemount 3100 Series Specifications

General

Brand	Emerson
Model	Rosemount 3100 Series
Category	Transmitter
Language	English