Emerson Rosemount 3100 Series Reference Manual

Reference Manual
00809-0100-4840, Rev CB
Appendix D: Rosemount 3490 Series Menus
February 2015
109
Rosemount 3490 Series Menus
Appendix D Rosemount 3490 Series Menus
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 109
Rosemount 3100 Series Transmitter (3102/3105) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 110
D.1 Introduction
The Rosemount 3102 and Rosemount 3105 can be used with the Rosemount 3490 Series
Control Unit. This control unit supplies the 24 Vdc loop-power to the transmitter, and provides
control functionality using the 4–20 mA signal from the transmitter. The control unit has HART
communications capability, and access to all of the parameters of the transmitter as shown in
the following pages.
Note
The Rosemount 3490 Series reference manual (Document Number 00809-0100-4841) provides
detailed instructions on the use and features of the control unit.
D.2 Menus and parameters
See Table D-1 on page 110.

Emerson Rosemount 3100 Series Specifications

General

Brand	Emerson
Model	Rosemount 3100 Series
Category	Transmitter
Language	English