213
Reference Manual
00809-0100-4840, Rev CB
Appendix F: Programming the 3102 and 3105 using HART
February 2015
Programming the 3102 and 3105 using HART
F.4.20 Manufacturer (D960)
This is the manufacturer name.
Field Communicator or AMS Device Manager
To view the manufacturer name
1. From the Home screen, select 2: Configure.
2. Select 2: Manual Setup.
3. Select 4: HART/Identity (3105) or
5: HART/Identity (3102).
4. Select 1: Identity.
5. Select 4: Manufacturer D960.
6. When finished, select EXIT to exit to the previous menu.
Rosemount 3490 Series Control Unit
To view the manufacturer name
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1: 3102”).
3. Select SYSTEM.
4. Select FIXED.
5. Select HART.
6. Select Manufacturer.
7. When finished, use the ESC key to exit to the previous menu.
Fast Keys
2, 2, 4 [or 5], 1, 4
Manufacturer D960
Rosemount
EXIT
HELP
(Field Communicator Screen Shown)
Manufacturer D960
Rosemount
(Rosemount 3491 Screen Shown)
To Next Page
Loading...
Need help?
General
