Endress+Hauser Proline Promass F 300 - Page 156

Commissioning Proline Promass F 300 EtherNet/IP
156
Parameter Prerequisite Description Selection / User
entry
Factory setting
Value 4 display A local display is provided. Select the measured value that
is shown on the local display.
• None
• Mass flow
• Volume flow
• Corrected volume
flow
• Target mass flow
• Carrier mass flow
• Target volume
flow
• Carrier volume
flow
• Target corrected
volume flow
• Carrier corrected
volume flow
• Density
• Reference density
• Reference density
alternative
• GSV flow
• GSV flow
alternative
• NSV flow
• NSV flow
alternative
• S&W volume flow
• Water cut
• Oil density
• Water density
• Oil mass flow
• Water mass flow
• Oil volume flow
• Water corrected
volume flow
• Oil corrected
volume flow
• Water volume flow
• Weighted density
average
• Weighted
temperature
average
• Concentration
• Dynamic viscosity
• Kinematic viscosity
• Temp.
compensated
dynamic viscosity
• Temp.
compensated
kinematic viscosity
• Temperature
• Carrier pipe
temperature
• Electronic
temperature
• Oscillation
frequency 0
• Oscillation
frequency 1
• Oscillation
amplitude 0
None