Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide xv
About This Guide
Thisguideprovidesanoverview,installationandtroubleshootinginstructions,andspecifications
fortheEnterasysS‐Series
®
StandAlone(SSA)switchmodels:
•SSA‐T4068‐0252
•SSA‐T1068‐0652
•SSA‐G1018‐0652
Who Should Use This Guide
Thisguideisintendedforanetworkadministratorwhoisresponsibleforinstallingandsettingup
theSSAswitch.
How to Use This Guide
Readthroughthisguidecompletelytofamiliarizeyourselfwithitscontentsandtogainan
understandingofthefeaturesandcapabilitiesoftheSSA
switch.Ageneralworkingknowledgeof
datacommunicationsnetworksishelpfulwhensettinguptheSSAswitch.
Thisprefaceprovidesthefoll owing:
•AnoverviewofthisguideandtheS‐Seriesmanualset
•Abriefsummaryofeachchapter
• Definitionsoftheconventionsusedinthisdocument
• Instructionsregardinghowtoobtaintechnical
supportfromEnterasys Networks.
Tolocateinformationaboutvarioussubjects inthisguid e,refertothefollowingtable.
Electrical Hazard: Only qualified personnel should install or service this unit.
Riesgo Electrico: Nada mas personal capacitado debe de instalar o darle servicio a esta unida.
Elektrischer Gefahrenhinweis: Installationen oder Servicearbeiten sollten nur durch
ausgebildetes und qualifiziertes Personal vorgenommen werden.
For... Refer to...
An overview of the SSA switch and its features. Chapter 1, Introduction
Instructions for installing the SSA switch hardware and
connecting the SSA switch to the network.
Chapter 2, Installation
Information on port, system, and power supply LEDs; how to
replace SSA fans; and how to restart or shut down the SSA
using the OFFLINE/RESET button.
Chapter 3, Troubleshooting
Specifications, environmental requirements, and physical
properties of the SSA.
Appendix A, Specifications
Information on how to reset the SSA mode switches. Appendix B, Resetting Mode Switches