Enterasys SSA-G1018-0652 - Removing the Rear Panel; Replacing Fans F11-F13

Replacing the SSA Fans
3-14 Troubleshooting
Replacing Fans F11–F13
ToreplaceanF11–F13fa n:
1. PutontheESDwriststrapandattachittothegroundreceptacleonthefrontoftheSSA.
2. RemovetherearpaneloftheSS Abyunscrewingthefourzinc(silver)screwsfromtherear
panel.SeeFigure 3‐11.
Figure 3-11 Removing the Rear Panel