Enterasys SSA-G1018-0652 - Unpacking the Power Supplies; Contents of SSA Power Supply Carton

Unpacking the Power Supplies
2-12 Installation
Unpacking the Power Supplies
TheSSA‐AC‐PS‐625WandSSA‐AC‐PS‐1000Wpowersupplymodulesareshippedinboxes
separatefromtheSSA.Tounpackapowersupply:
1. Unpackthepowersupplybyremovingitfromtheshippingboxandslidingthetwofoamend
capsofftheunit.
Savetheshippingbox
andmaterialsintheeventtheunitmustbereshipped.
2. VerifythecontentsoftheboxusingTable 2‐2.
3. Removethepowersupplyfromitsprotectiveplasticbag.
4. Examinethepowersupplycarefully,checkingfordamage.
Ifthereareanysignsofdamage,DONOTinstallthepowersupply;instead,contactEnterasys

Networks.Referto“GettingHelp”onpage xviifordetails.
Table 2-2 Contents of SSA Power Supply Carton
Item Quantity
Power supply (SSA-AC-PS-625W or SSA-AC-PS-1000W) 1
For USA shipments: NEMA Power Cord 6-20, C19, R/A, SHLD
Type of power cord is dependent on country of installation.
1
NOTICE Card 1