Enterasys SSA-G1018-0652 - Specifications; SSA Hardware Specifications

Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide A-1
A
Specifications
Thisappendixprovidesthefollowinginformation:
Enterasys Networksreservestherighttochangespecificationsatanytimewithoutnotice.
SSA Specifications
Table A‐1describesI/Oports,physical,electrical,andenvironmentalspecificationsfortheSSA.
For information about... Refer to page...
SSA Specifications A-1
Pluggable Transceiver Specifications A-2
COM Port Pinout Assignments A-2
Regulatory Compliance A-3
Table A-1 Specifications
Item Specification
SSA-T4068-0252 Ports
Ports 1 through 48 48 10/100/1000BASE-T RJ45 ports
Ports 49 through 52 4 10GBASE-X SFP+ ports
SSA-T1068-0652 Ports
Ports 1 through 48 48 10/100/1000BASE-T RJ45 ports
Ports 49 through 52 4 10GBASE-X SFP+ ports
SSA-G1018-0652 Ports
Ports 1 through 48 48 1000BASE-T SFP ports
Ports 49 through 52 4 10GBASE-X SFP+ ports
Physical (SSA Chassis)
Dimensions 4.44 cm H x 44.70 cm W x 59.43 cm D
1.75” H x 17.60” W x 23.40” D
Approximate Weight Gross: 11.79 kg (26 lb)
Mean Time Between Failure (MTBF) Refer to the MTBF web site at URL
http://www.enterasys.com/support/mtbf/