Enterasys SSA-G1018-0652 - Securing the SSA in a Four-Post Rack

Mounting the SSA
2-6 Installation
6. SecurethefrontoftheSSAtotherackbyscrewingthecustomer‐suppliedrackscrewsinthe
mountingearsontherightandleftfrontoftheSSA.SeeFigure 2‐2.
Figure 2-2 Securing the SSA in a Four-post Rack
7. (Optional)SecuretherearoftheSSAtotherails.See“SecuringtheSSAtotheRearof
the
Rails”onpage 2‐11.
YoucannowunpackandinstalltheSSApowersupplies.See“UnpackingthePowerSupplies”on
page 2‐12and“InstallingthePowerSupplies”onpage 2‐13.