Enterasys SSA-G1018-0652 - Replacing Fans F1-F7; Removing the Side Panel of the SSA

Replacing the SSA Fans
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide 3-9
Replacing Fans F1–F7
ToreplaceanF1–F7fan:
1. PutontheESDwriststrapandattachittothegroundreceptacleonthefrontoftheSSA.
2. RemovethesidepanelfromtheSSAby unscrewingtheeightzinc(silver)screwsfromthe
sidepanel.SeeFigure 3‐5.
Figure 3-5 Removing the Side Panel of the SSA