Need help?Do you have a question about the Enterasys Matrix E1 1H582-51 and is the answer not in the manual?
General| Device Type | Switch |
|---|---|
| Model | Matrix E1 1H582-51 |
| Ports | 48 |
| Uplink Ports | 4 |
| Power over Ethernet (PoE) | No |
| Manageable | Yes |
| Jumbo Frame Support | Yes |
| Power Supply | Internal |
| Form Factor | 1U |
| MAC Address Table | 16K entries |
Provides an overview of Enterasys Networks' embedded Web server, WebView, and its capabilities.
Details the tasks a network manager can perform using WebView for initial configuration and management.
Outlines the prerequisites for using WebView, including console setup and IP configuration.
Explains how to launch a WebView session by accessing the device's IP address via a web browser.
Allows viewing and configuring device settings like name, location, and system uptime.
Configures IP address, subnet mask, gateway, and maximum Telnet sessions.
Configures IP addresses for SNMP traps and enables or disables traps.
Sets SNMP community names and access policies (Read-Only, Read-Write).
Allows setting a new login password for the device.
Manages downloading new firmware images from a TFTP server.
Provides basic information about configured VLANs and allows access to VLAN configuration screens.
Views static and dynamic VLANs, port egress lists, and untagged frame configurations.
To Next Page
