SNMP Traps Configuration Screen
WebView Local Management Tasks 3-7
Screen Element Descriptions
Refer to Table 3-4 for a functional description of each screen element.
Table 3-4 SNMP Traps Configuration Screen Element Descriptions
Use this field… To…
Trap Destinations Enter a destination IP address for an SNMP trap. This identifies the
network management station where SNMP alerts of status changes will
be sent.
Trap Community
Name
Enter an SNMP community name to associate with the trap.
Community names act as passwords to remote SNMP management.
Enable Traps Enable or disable the SNMP traps associated with the displayed Trap
Destinations and Trap Community Name.
Enable
Authentication
Traps
Enable the device to issue a trap message to specified IP trap managers
whenever authentication of an SNMP request fails.