About This Guide ix
About This Guide
Welcome to the Enterasys Networks Matrix E1 Series (1G582-09 and 1H582-51) WebView
User’s Guide. This manual explains how to perform Local Management tasks on the Matrix E1
1G582-09 and 1H582-51 devices using WebView. Enterasys Networks’ HTTP-based Web
management application, WebView is an intuitive tool for initial configuration and simple
management tasks.
USING THIS GUIDE
A general working knowledge of basic network operations is helpful before configuring the Matrix
E1 device.
This manual describes how to do the following:
• Access the Matrix E1 WebView application.
• Navigate through Matrix E1 WebView screens.
• Use the screens to perform initial device configuration and simple network management tasks.
STRUCTURE OF THIS GUIDE
The guide is organized as follows:
Chapter 1, Introduction, provides an introduction to WebView, an overview of the Matrix E1
Local Management tasks that may be accomplished using WebView, and information on how to
contact Enterasys Networks for technical support.
Chapter 2, Starting and Navigating WebView, provides information about preparing to use
WebView, starting the WebView application, WebView security features, an overview of the
WebView user interface, how to navigate through WebView screens, and describes port
designations in WebView.
Important Notice
Depending on the firmware version used in the Matrix E1 device, some features described in this
document may not be supported. Refer to the Release Notes shipped with the Matrix E1 device to
determine which features are supported.
To Next Page
Loading...
Need help?
General