IP Configuration Screen
WebView Local Management Tasks 3-5
3.4 IP CONFIGURATION SCREEN
When to Use
To configure the host IP state, IP address, subnet mask, gateway IP address, and maximum number
of Telnet sessions allowed, and to view the device’s MAC address.
How to Access
Click on IP on the WebView navigation frame. The IP Configuration screen, Figure 3-3, displays.
Screen Example
Figure 3-3 IP Configuration Screen
Screen Element Descriptions
Refer to Table 3-3 for a functional description of each screen element.
Table 3-3 IP Configuration Screen Element Descriptions
Use this field… To…
IP Address See or enter a new local host IP address.
Subnet Mask See or enter a new local host subnet mask. Default is 255.255.0.0.
Gateway IP Address See or enter a new gateway IP address.
MAC Address See the local host’s MAC address.
Maximum Number
of Telnet Sessions
(1-4)
Select the maximum number of Telnet sessions allowed (from 1 to 4).
To Next Page
Loading...
