Enterasys Matrix E1 1H582-51 - Security Configuration Screen

Security Configuration Screen
3-10 WebView Local Management Tasks
3.7 SECURITY CONFIGURATION SCREEN
When to Use
To set a new login password for the device.
How to Access
Click on Security on the WebView navigation frame. The Security Configuration screen,
Figure 3-6, displays.
Screen Example
Figure 3-6 Security Configuration Screen
Screen Element Descriptions
Refer to Table 3-6 for a functional description of each screen element.
Table 3-6 Security Configuration Screen Element Descriptions
Use this field… To…
Old Password Enter the old login password or, if none has been configured on the
device, leave this field blank. By default at device start up, no
password is configured.
New Password Enter the new login password.
Confirm Password Re-enter the new login password.