System Screen
3-2 WebView Local Management Tasks
Does not apply to MATRIX E7.
• Viewing and configuring port settings, such as administrative status (enabled or disabled), link,
speed, duplex, flow control status, and configuring port trunking (Section 3.27 through
Section 3.31).
• Viewing port Ethernet-like statistics, such as transmission errors, and RMON statistics
(Section 3.32).
• Configuring console settings, such as baudrate, time-out and auto-refresh time (Section 3.33).
3.2 SYSTEM SCREEN
When to Use
To view and configure system (device) settings, such as the name and location of the device. Links
on this screen also enable you to Telnet to the textual Command Line Interface (CLI), to send
email to Enterasys technical support, and to connect to the Enterasys Web page.
How to Access
Click on System in the WebView navigation frame. The System screen, Figure 3-1, displays.
Screen Example
Figure 3-1 System Screen
To Next Page
Loading...
Need help?
General