SNMP Community Names Screen
WebView Local Management Tasks 3-9
Screen Element Descriptions
Refer to Table 3-5 for a functional description of each screen element.
Table 3-5 SNMP Community Names Screen Element Descriptions
Use this field… To…
Community Name Enter a community name through which a user will access SNMP
management.
Access Policy Select the access permission accorded each community name. The
available access levels are:
• Read-Only: This community name gives the user read-only access
to the device MIB objects, and excludes access to security-protected
fields of read-write authorization.
• Read-Write: This community name gives the user read-write access
to the device MIB objects and also gives “super-user” access
allowing the user to change all modifiable parameters, including
community names, IP addresses, traps and SNMP objects.
Status Select the status (Enabled, Disabled or Remove) for each access
policy.
To Next Page
Loading...
Need help?
General