Enterasys SSA-G1018-0652 - Page 45

Pin Out Descriptions Completing the Installation
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide 2-21
StarttheCommandLineInterface(CLI)fromthedevice’slocalconsoleportasfollows:
1. Connectaterminaltothelocalconsoleportasdescribedin“ConnectingtotheCOMPortfor
LocalManagement”onpage 2 ‐18.Thestartupscreendisplays.
2. Attheloginprompt,enteroneofthefollowingdefaultuser
names:
– roforRead‐Onlyaccess
– rwforRead‐Writeaccess
– adminforSuperUseraccess.(ThisaccesslevelallowsRead‐Writeaccesstoallmodifiable
parameters,includinguseraccounts.)
3. PressEnter.
4. ThePasswordpromptdisplays.LeavethisstringblankandpressEnter.Thedevice
informationandSSApromptappear
asshownabove.
TheSSAisnowreadytobeconfigured.ForinformationaboutsettingtheIPaddressand
configuringTelnetsettingsforremoteaccesstoSSAmanagement,refertotheEnterasysS‐Series
ConfigurationGuide.
TheCLIcommandsenableyoutoinitiallysetupandperformmoreinvolvedmanagement
configurations.
TheEnterasysS‐SeriesConfigurationGuideisavailableonlineat:
http://www.enterasys.com/support/manuals
login: admin
Password:
SSA
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2009
Chassis Serial Number: xxxxxxxxxxxx
Chassis Firmware Revision: xx.xx.xx
SSA (su)->