92 Using the Printer Software with Windows
Re-printing your print job
Clicking the Print button on the EPSON Status Monitor 3 screen
lets you print a spooled job.
Follow the steps below to re-print your job.
Note:
You cannot re-print your jobs in the following cases.
❏ The status of the job is other than Held.
❏ The job is sent by someone other than you.
❏ When multiple jobs are selected
1. Access EPSON Status Monitor 3. See “Accessing EPSON
Status Monitor 3” on page 88 for details.
2. Click Job Information tab.
3. Job Type: Displays the job type. When the Reserve job function
is used, the jobs are displayed as Stored, Verify,
Re-Print, and Confidential respectively. About the
Reserve Job function, see “Using the Reserve Job
Function” on page 77.
4. Refresh
button:
Clicking this button refreshes the information on
this menu.
5 Print
button:
Displays the dialog box to print the spooled and
Held status job.
See “Re-printing your print job” on page 92 for
details.
6. Cancel
Job
button:
Selecting a print job and clicking this button, cancels
the selected print job.
To Next Page
Loading...
