Epson AcuLaser C2800

To Next Page

To Previous Page

AcuLaser C2800/C2800D/C3800/C3800D Revision C

TROUBLESHOOTING Controller-related Trouble FIP 134

Confidential

 Failed Parts List

Controller Board

Program DIMM

Opt. ROM DIMM

Std. RAM DIMM

Opt. RAM DIMM

Network Board

Video I/F Cable

Engine Controller Board

Noise

Error

Code

Description

0000-

0799

CPU exception (controller or software failure) @ @

0800 IPL error (controller defect) @ @

0998 Engine communication error (only when power-

on)

@ @ @

0999 Engine flash ROM has no program data @

1000 Standard RAM error (not installed, etc.) @

1001 Standard RAM error (minimum stack is

undefined, etc.)

1002 Standard RAM error (standard size is undefined,

etc.)

1003 Optional RAM error @

1010 Verification error @

1020 RAM error (slot 0) @ @

1021 RAM error (slot 1) @ @

1022 RAM error (slot 2) @

1100 ROM checksum error (bit 0 to 15) (font) @

1101 ROM checksum error (bit 16 to 31) (font) @

1110 ROM checksum error (bit 0 to 15) (font latter half) @

1111 ROM checksum error (bit 16 to 31) (font latter

half)

1120 ROM checksum error (bit 0 to 7) (program) @

1121 ROM checksum error (bit 8 to 15) (program) @

1122 ROM checksum error (bit 16 to 23) (program) @

1123 ROM checksum error (bit 24 to 31) (program) @

1170 Optional FONT ROM checksum error @

1180 Optional ROM module A checksum error @

1181 Optional ROM module B checksum error @

1182 Optional ROM module C checksum error @

1185 ROM module unsupported @

1200 EEPROM writing error @

1210 EEPROM writing times limit @

1300 RTC failure @

1400 Engine initialization error @

1500 CCNV hardware error @

1550 Initialization hardware error for SRAM for

compression

1600 Video series hardware error (including PWMIC

calibration error)

1610 Video series hardware error (VCNV error) @

1700 Loopback test failure of network board @

1702 Network board uninstalled @

1710 Token Ring hardware error @

1800 Illegal SPD @

1999 Other hardware errors @

2000 Software error @