AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Preliminary Check 160
Confidential
4.1 Preliminary Check
4.1.1 Required Tools
Special tools are not required for maintenance of the equipment.
4.1.2 Prohibited Disassembly
Disassembling the parts described below is strictly prohibited.
If not observed, it causes failure or malfunction of the printer.
Consumable products/Periodic replacement parts/ASP
Do not disassemble consumable products, periodic replacement parts, or units
provided as single service parts should not be disassembled.
e.g.)
FUSER UNIT
TRANSFER UNIT
ROS ASSY
Disassembly not explained in this manual
Do not perform any disassembly not explained in this manual.
Especially the screws that secure the main unit frame must not be removed or
loosened as they are precisely adjusted at factory.
To Next Page
Loading...
