AcuLaser C2800/C2800D/C3800/C3800D Revision C
OPERATING PRINCIPLES Mode 59
Confidential
2.6 Mode
2.6.1 Operating Modes
The printer has the following six operating modes:
Wait Mode
The printer is adjusting print image quality
Ready Mode
The printer is ready to print
Printing Mode
Printing is in progress
Error Mode
The printer detected an error
Initializing Mode
The printer detected that new part was installed at the moment
(e.g. Idling after new Deve Unit is installed)
Checking Unit Mode
The printer is checking the consumable products
Mode transition between each mode is shown below:
Figure 2-38. Mode Transition Diagram
In