Epson AcuLaser C2800 - Adjustment; Adjusting Color Registration Alignment (Auto)

EPSON AcuLaser C2800/C2800D/C3800/C3800D Revision C
ADJUSTMENT Adjustment 383
Confidential
5.2 Adjustment
5.2.1 Adjusting Color Registration Alignment (Auto)
PURPOSE
Automatically adjusts the registration position of each color precisely relative to black.
ADJUSTING COLOR REGISTRATION
1) Make sure the LCD panel displays Ready, then press the [ ] button to
access the control panel menus.
2) Press the [ ] button several times until the LCD panel displays Color Regist
Menu, then press the [ ] button twice.
C H E C K
P O I N T
You may not be able to adjust the color registration when the
printer is in the sleep mode or when any error has occurred even if
you can select the item from the menu on the control panel.