Epson AcuLaser C2800 User Manual

EPSON AcuLaser C2800/C2800D/C3800/C3800D Revision C
ADJUSTMENT Adjustment Items 382
Confidential
5.1 Adjustment Items
The following table shows the adjustment items required after fixing or replacing certain parts (units).
*1: Perform Color Registration Alignment (manual) if the misalignment in main-scanning direction is too severe to adjust by Color Registration Alignment (Auto).
Table 5-1. Adjustment Items
Parts Timing Adjustment Item Procedure Required Tools or Program Reference
---
 When the printer is transported without replacing
the cartridge(s).
 When the color registration seems misaligned.
Color Registration Alignment (Auto) Execute from the control panel.
---
See Page 383
Color Registration Alignment (Manual)
*1
See Page 384
Controller board After replacing the controller board with a new one. Write USB ID Execute from the special program. Special program See Page 385
PWBA MCU When replacing the PWBA MCU with a new one.
 EEPROM Data Backup
 EEPROM Data Restore
Execute from the special program. MCU Maintenance Program See Page 387
When installing the PWBA MCU once used in other
printer.
MCU Initialize

Epson AcuLaser C2800 Specifications

General

Brand	Epson
Model	AcuLaser C2800
Category	Printer
Language	English