Epson AcuLaser C2800 - Disassembly;Reassembly; How to Read this Chapter

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 177
Confidential
4.4 Disassembly/Reassembly
4.4.1 How to Read this Chapter
PAGE CONFIGURATION
 Opening page
 Main page
AcuLaser C2800/C2800D/C3800/C3800D Revision A
DISASSEMBLY/ASSEMBLY DISASSEMBLY/REASSEMBLY 174
4.4 DISASSEMBLY/REASSEMBLY
4.4.1 COVER (PART 1)
DISASSEMBLED PARTS
LOCATION
Table 4-1. List of Disassembled Parts
Name Guide
COVER REAR
COVER EXTENSION 1
COVER EXTENSION 2
COVER SIDE IF
A
B
C
COVER REAR
COVER SIDE IF
COVER EXTENSI ON 1
COVER EXTENSI ON 2
Name/Guide
Lists part names in Name column, whose
disassembly procedures are described in the
section. Refer to alphabets in Guide column
to disassemble each part.
Location
Shows locations of each
part.
Section Title
Shows title of the section.
AcuLaser C2800/C2800D/C3800/C3800D Revision A
DISASSEMBLY/ASSEMBLY DISASSEMBLY/REASSEMBLY 175
COVER REAR
1. Remove the four screws (silver, self-tapping, 10 mm) that secure the COVER REAR to the main unit.
2. Remove the COVER REAR from the main unit.
A
1)
1)
1)
1)
2)
Kmy03003E
A
COVER REAR
COVER EXTENS ION 1
COVER EXTENS ION 2
1. Open the COVER EXTENSION 1.
2. With the center of the COVER EXTENSION 1 bowed a little, pull out the protrusion on one side of
the COVER EXTENSION 1 through the hole in the COVER TOP.
3. Pull out the protrusion on the other side of the COVER EXTENSION 1 through the COVER TOP,
and remove the COVER EXTENSION 1.
NEXT>>
B
Kmy03007EA
2)-1
2)-2
3)
COVER EXTENSION 1
Guide
Guide to indicate the procedual steps.
Procedure
Shows disassembly procedure.
Reassemble parts in the reverse
order of their removal.
Next
Procedure continues
on the next page.
Part Name
Shows part to be disassembled or
operation to be performed in the column.