Epson AcuLaser C2800 - Page 153

AcuLaser C2800/C2800D/C3800/C3800D Revision C
TROUBLESHOOTING Abnormal Noise-related Trouble 153
Confidential
FIP-N3 DURING PRINTING
 Possible parts that caused the error
 Troubleshooting
 DRIVE ASSY MAIN
 FUSER UNIT
 IMAGING CARTRIDGE (Y/M/C/K)
 TRANSFER UNIT
 DRIVE ASSY PH
 DRIVE ASSY OPT FDR
 FEEDER ASSY DUP
Step Check Yes No
1
Is abnormal noise being
generated by the DRIVE ASSY
MAIN?
Reinstall the DRIVE
ASSY MAIN. When the
trouble still occurs,
replace the DRIVE
ASSY MAIN. (p.317)
Go to Step [2].
2
Is abnormal noise being
generated by the FUSER UNIT?
Reinstall the FUSER
UNIT. When the trouble
still occurs, replace the
FUSER UNIT. (p.298)
Go to Step [3].
3
Is abnormal noise being
generated by the IMAGING
CARTRIDGE (Y/M/C/K)?
Reinstall the IMAGING
CARTRIDGE (Y/M/C/
K). When the trouble still
occurs, replace the
IMAGING
CARTRIDGE (Y/M/C/
K). (p.271)
Go to Step [4].
4
Is abnormal noise being
generated by the TRANSFER
UNIT?
Reinstall the
TRANSFER UNIT.
When the trouble still
occurs, replace the
TRANSFER UNIT.
(p.268)
Go to Step [5].
5
Is abnormal noise being
generated by the DRIVE ASSY
PH?
Reinstall the DRIVE
ASSY PH. When the
trouble still occurs,
replace the DRIVE
ASSY PH. (p.317)
Go to Step [6].
Step Check Yes No
6
Is abnormal noise being
generated by the DRIVE ASSY
OPT FDR?
Reinstall the DRIVE
ASSY OPT FDR. When
the trouble still occurs,
replace the DRIVE
ASSY OPT FDR. (p.370)
Go to Step [7].
7
Is abnormal noise being
generated by the FEEDER ASSY
DUP?
Reinstall the FEEDER
ASSY DUP. When the
trouble still occurs,
replace the FEEDER
ASSY DUP. (p.349)
---