AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 181
Confidential
4. Open the COVER EXTENSION 2.
5. With the center of the COVER EXTENSION 2 bowed a little, pull out the protrusion on one side of
the COVER EXTENSION 2 through the hole in the COVER EXTENSION 1.
6. Pull out the protrusion on the other side of the COVER EXTENSION 2 through the COVER
EXTENSION 1, and remove the COVER EXTENSION 2.
Kmy03082E
5)-1
5)-2
6)
COVER EXTENSION 2
COVER SIDE IF
1. Release the two tabs on the COVER SIDE IF, and remove the COVER SIDE IF.
C
Kmy03008E
1)-1
1)-1
1)-2
COVER SIDE IF