Epson AcuLaser C2800 - Page 190

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 190
Confidential
KIT TRAY ASSY MSI SEC
1. Open the COVER ASSY MSI.
Be careful not to drop or damage the COVER ASSY MSI.
2. Release the tabs on the PIN PIVOT MSIs that secure the LINK ASSY MSI, which is on the left and
right ends of the COVER ASSY MSI, to the COVER ASSY FRONT, and remove the PIN PIVOT
MSIs inward.
When installing the LINK ASSY MSI R, place the LEVER MSI 1 on top of the LINK ASSY
MSI R.
NEXT>>
C
Kmy03015EA
2)-1
1)
2)-1
2)-2
LEVER MSI 1
2)-2
3. Rotate the LINK ASSY MSI L and the LINK ASSY MSI R so that the cutouts of their shafts match
the protrusions of the TRAY ASSY MSI BASE, and remove the LINK ASSY MSI L and the LINK
ASSY MSI R.
Mind the correct orientation when installing the LINK ASSY MSI L and the LINK ASSY
MSI R.
 Make sure that the pad attaching parts of the LINK ASSY MSI L and the LINK ASSY
MSI R are on the downside.
 Do not switch the LINK ASSY MSI L and the LINK ASSY MSI R.
4. While pulling the edges of the COVER MSI outward, remove the TRAY ASSY MSI BASE together
with the TRAY MSI.
When installing the TRAY ASSY MSI BASE and the TRAY MSI, be sure to insert their
shaft into the correct position.
NEXT>>
Kmy03016E
A
3)-1
3)-1
4)-1
4)-1
4)-2
3)-2
3)-2
LINK ASSY MSI R
LINK ASSY MSI L