Epson AcuLaser C2800 - Page 386

EPSON AcuLaser C2800/C2800D/C3800/C3800D Revision C
ADJUSTMENT Adjustment 386
Confidential
WRITING METHOD
The method for writing USB ID varies according to the conditions of the main board. Be sure to figure out the appropriate method with reference to the following table.
For details on how to write the ID, follow the instructions shown in the program.
 Store optional ID  Store auto-generated NEW ID  OLD ID Retrieval/Restore
CONFIRMING THE ID
When the writing USB ID is completed, print a status sheet to confirm that the serial number printed on the sheet is identical to that on the label attached to the printer.
(Refer to “7.4.1 Status Sheet” (p.413))
Table 5-2. Writing Method
Main Board Condition Previous ID Check
Writing Method
(Button Name)
Description
Communication between the computer
and the main board is impossible
The previous ID can be confirmed with a printed paper such
as a status sheet.
Store optional ID Enter the previous ID to write it into new main board.
The previous ID cannot be confirmed by any means. Store auto-generated NEW ID The program automatically creates new ID from the serial
number of the printer. Write the ID into new main board.
Communication between the computer
and the main board is possible
(The previous ID can be read from the previous main board.) OLD ID Retrieval/Restore Retrieve the ID from the old board, and enter the ID into
new board.