Epson AcuLaser C2800 - Page 404

EPSON AcuLaser C2800/C2800D/C3800/C3800D Revision C
APPENDIX Control Panel Special Features 404
Confidential
PRINTER ADJUST MENU
Menu Option Function
Normal 0 ~ 1 Selects the paper type to be notified to the engine when Normal is selected for paper type.
0: PlainPaper-L (full speed) 1: PlainPaper-H (full speed)
Thick 0 ~ 1 Selects the print speed to be notified to the engine when Thick is selected for paper type.
0: Normal mode 1: Half speed mode
Coated 0 ~ 2 Selects the paper type to be notified to the engine when Coated is selected for paper type.
0: CoatedPaper-H (half speed) 1: CoatedPaper-M (half speed) 2: CoatedPaper-L (full speed)
Transfer Normal
*1*2
-3 ~ 0 ~ 3 Selects the transfer current when Normal is selected for paper type.
Transfer Label
*1*2
-3 ~ 0 ~ 3 Selects the transfer current when Label is selected for paper type.
Transfer Thick
*1*2
-3 ~ 0 ~ 3 Selects the transfer current when Thick is selected for paper type.
Transfer ExtraThk
*1*2
-3 ~ 0 ~ 3 Selects the transfer current when ExtraThk is selected for paper type.
Transfer Trnsprnc
*1*2
-3 ~ 0 ~ 3 Selects the transfer current when Trnsprnc is selected for paper type.
Transfer Envelope
*1*2
-3 ~ 0 ~ 3 Selects the transfer current when Envelope is selected for paper type.
Transfer SemiThk
*1*2
-3 ~ 0 ~ 3 Selects the transfer current when SemiThk is selected for paper type.
Transfer Coated
*1*3
-3 ~ 0 ~ 3 Selects the transfer current when Coated is selected for paper type.
Temp Normal
*4*5
-6 ~ 0 ~ 6 Selects the fuser temperature when Normal is selected for paper type.
Temp Label
*4*5
-6 ~ 0 ~ 6 Selects the fuser temperature when Label is selected for paper type.
Temp Thick
*4*5
-6 ~ 0 ~ 6 Selects the fuser temperature when Thick is selected for paper type.
Temp ExtraThk
*4*5
-6 ~ 0 ~ 6 Selects the fuser temperature when ExtraThk is selected for paper type.
Temp Trnsprnc
*4*5
-6 ~ 0 ~ 6 Selects the fuser temperature when Trnsprnc is selected for paper type.
Temp Envelope
*4*5
-6 ~ 0 ~ 6 Selects the fuser temperature when Envelope is selected for paper type.
Temp SemiThk
*4*5
-6 ~ 0 ~ 6 Selects the fuser temperature when SemiThk is selected for paper type.
Temp Coated
*3*4
-6 ~ 0 ~ 6 Selects the fuser temperature when Coated is selected for paper type.
Charger 0 ~ 3
*6
Specifies electrostatic potential for printing.
FeedOffset -3.5 ~ 0.0
~ 3.5 Adjusts offset in sub-scanning direction in printing.
Scan Offset -3.5 ~ 0.0 ~ 3.5 Adjusts offset in main scanning direction in printing.
Feed Offset2 -3.5 ~ 0.0 ~ 3.5 Adjusts offset in sub-scanning direction when printing on back side of paper in duplex printing.
Scan Offset2 -3.5 ~ 0.0 ~ 3.5 Adjusts offset in main scanning direction when printing on back side of paper in duplex printing.
Calibration Execute Executes AIDC (Auto Image Density Control).