Epson DFX-9000 - Tools and Instruments

Epson DFX 9000 Revision B
Disassembly and Assembly 125
4.1.2 Tools and instruments
The table below lists the tools and the instruments required for
disassembling, assembling or adjusting the printer. Use only tools that
meet these specifications.
Note: All tools and instruments listed above are commercially
available.
Table 4-1. Tool and Instrument List
Name Specification Epson Part No.
Phillips screwdriver No.2 B743800200
Phillips screwdriver No.1 B743800100
Screwdriver Flat head -
Hex nut driver 5 mm B741700200
Tweezers - B741000100
Round-nose pliers - B740400100
Thickness gauge - B776702201
E-Ring holder Size: #6 B740800800
Cotton tape 10 mm (1/2 in) wide -
Multi-Meter Ohm/Voltage/Current -
Oscilloscope Min. 50MHz -