Epson DFX-9000 - Ces Scale

Epson DFX 9000 Revision B
Disassembly and Assembly CES SCALE 159
4.2.4.6 CES SCALE
1. Remove the UPPER UNIT (p. 135)
2. Tilt up the rear of the PR MECHA ASY and keep it in place with the
tilt bar. Refer to section 4.2.4.1 PR MECHA ASY, p. 149.
3. Release the Tension Spring, located at the right end of the CES
SCALE, from the tab on the SIDE FRAME, RIGHT, and release the
CES SCALE.
Figure 4-37. CES SCALE Removal (1)
W A R N I N G
Do not touch the PRINT HEAD immediately after using
the printer, or you may burn your hand. Allow the head to
cool enough to work with it.
3)
CES SCALE
Tension spring