Epson DFX-9000 - Covers; Front Cover Asy

Epson DFX 9000 Revision B
Disassembly and Assembly FRONT COVER ASY 132
4.2.2 Covers
4.2.2.1 FRONT COVER ASY
1. Facing the front of the printer, open the FRONT COVER ASY, and
remove the stopper on the left inside of the FRONT COVER ASY in
the direction of the arrow.
Figure 4-2. FRONT COVER ASY Removal (1)
2. With the FRONT COVER ASY open, push it to the right until the
center bows upward enough to release it from the hinge pin on the
left side of the UPPER UNIT.
3. Release the hinge pin on the right side of the UPPER UNIT, and
remove the FRONT COVER ASY toward you.
Figure 4-3. FRONT COVER ASY Removal (2)
FRONT COVER
Stopper
1)-2
1)-1
Tab
2)-1
2)-2
3)