Epson DFX-9000 - Op Unit

Epson DFX 9000 Revision B
Disassembly and Assembly OP UNIT 134
4.2.2.4 OP UNIT
1. Open the TOP COVER, and release the three tabs on the inside top
edge of the OP UNIT by pressing them from inside the UPPER
UNIT. Gently pull the OP UNIT out toward you to gain access to the
OP CABLE.
2. Disconnect the OP CABLE from the connector on the back of the
OP UNIT, and then remove the OP UNIT.
Figure 4-6. OP UNIT Removal
OP UNIT
TOP COVER
OP CABLE
Tabs
1)-1
1)-2
2)-1
2)-2