Epson DFX-9000 - Upper Unit

Epson DFX 9000 Revision B
Disassembly and Assembly UPPER UNIT 135
4.2.2.5 UPPER UNIT
1. Remove the FRONT COVER ASY (p. 132)
2. Remove the REAR UNIT (p. 133)
3. Remove the OP UNIT (p. 134)
4. Remove the two C.P. (S-P1) 4 × 12 screws that secure the UPPER
UNIT.
5. Pull the two parts of the UPPER UNIT shown in Figure 4-7 toward
you to release the two tabs (right and left) that secure the UPPER
UNIT to the LOWER UNIT, and lift the UPPER UNIT upward to
remove it.
6. Open the TOP COVER and remove it upward.
Figure 4-7. UPPER UNIT Removal (1)
7. Remove the two C.B.P. 3 × 8 screws, one on each side, that secure
the TOP COVER rotation stops to the inside of the UPPER UNIT.
Figure 4-8. UPPER UNIT Removal (2)
4)
4)
5)-1
5)-1
5)-2
tab
LOWER UNIT
UPPER UNIT
TOP COVER
Stopper
6)
6)
7)