Epson DFX-9000 - Adjustment Program

Epson DFX 9000 Revision B
Adjustment Adjustment overview 218
5.1.3 Adjustment program
Various adjustments are required if the repair of the unit includes the
replacement or disassembly of certain components. A proprietary
Adjustment Program is provided to facilitate adjustments and settings
after repair and reassembly. This section describes how to use the
Adjustment Program.
5.1.3.1 Preparation
System requirements
Windows (98 SE, 2000, XP)-based PC with Parallel or USB I/F
Installation
Decompress the supplied self-extracting archive file into a file folder by
double-clicking on the program icon.
5.1.3.2 Running the program
To run the program, double-click on the program icon
[APDFX9000_VerXX.exe]. When the main menu is displayed, select
the appropriate value for each menu item as follows:
Model name: DFX-9000
Destination:
Select the geographical area that matches your market.
Program Type: Particular Adjustment Mode (Preselected)
Next, select the interface port to which the DFX-9000 is connected.
Click Refresh, and the program searches for printers connected to all
ports so you can easily find the DFX-9000.