Epson DFX-9000 - Page 188

Epson DFX 9000 Revision B
Disassembly and Assembly DV ROLLER UNIT 181
8. Remove the C.B.S. 3 × 6 screw that secures the OC SENSOR BR
UNIT, and remove the OC SENSOR BR UNIT. See OC SENSOR
BR UNIT (p. 204).
9. Remove the E-ring that secures the left end of the DV ROLLER F
ASY, and remove the DV gear.
10. Remove the Nip gear from the Nip roller shaft.
11. Remove the OC slide cam L, and remove the Bearing RL from the
DV ROLLER R ASY.
Figure 4-61. DV ROLLER R ASY Removal (2)
C A U T I O N
When removing the OC SENSOR BR UNIT, be careful
not to interfere with the tabs on the bottom of the OC slide
cam L that pass through the photo sensor.
OC SENSOR BR UNIT
8)
Nip roller shaft
DV ROLLER F ASY
E-ring
DV gear
Nip gear
9)-1
10)
9)-2
OC slide cam L
11)-1
11)-2
Bearing RL
DV ROLLER R ASY