Epson DFX-9000 - Page 200

Epson DFX 9000 Revision B
Disassembly and Assembly CARRIER UNIT 193
CARRIER UNIT
11. Release all the cables from the two cable clamps on the SIDE
FRAME, LEFT.
12. Remove the C.B.S. 3 × 6 screw that secures the CR cable cover, and
remove the CR cable cover.
13. Release the six tabs that secure the Cable cover to the frame, and
remove the Cable cover.
14. Slide the Cable holder in the direction of the arrow to remove it.
Figure 4-77. CARRIER UNIT Removal (1)
12)-1
6 Tabs
CR cable cover
Cable clamp
Cable cover
13)
Cable clamp
CARRIER CABLE UNIT
14)
Cable holder
CARRIER CABLE UNIT
12)-2