Epson DFX-9000 - Page 222

Epson DFX 9000 Revision B
Adjustment Adjustment overview 215
5.1.2.1 APG Gauge Jig
The APG Gauge Jig (#F957, P/N: 1422621) comprises the following
parts, and each part is used separately or assembled together, depending
on the adjustment. This section explains how to assemble and use the
APG Gauge Jig.
APG Gauge Jig adjustment use is summarized in the table below.
Note: *This adjustment can be made without using the APG Gauge Jig.
Table 5-3. APG Gauge Jig
Name
Dial gauge
Dummy-head
Level block
Table 5-4. Applicable Adjustment
Part Adjustment Ref.
Dummy-head
only
APTC Thickness Detection APTC thickness
detection
adjustment (p. 238)
Dial gauge +
Dummy-head
Carriage Parallelism Carriage parallelism
adjustment (p. 229)
APTC Detection Position APTC detection
position adjustment
(p. 241)
APTC Unit Mount Position * APTC UNIT mount
position adjustment
(p. 224)