145
Maintenance
1
Press the power button to turn off the power.
2
When the power LED goes out, disconnect the power cord and Ethernet cable.
3
Attach protective materials to the arm, and secure them with tape.
4
Attach Stacker 1, Stacker 2, and Stacker 3, and secure them with tape.
5
Open the ink cartridge cover, and secure the ink cartridges with tape.
6
Close the ink cartridge cover, disc cover, and Stacker 4, and secure them with tape.
7
With the bottom of the product facing downwards, place the product into the packing box
so that it is oriented horizontally.
To Next Page
Loading...
