Epson DiscProducer PP-100N - EPSON Total Disc Monitor

50
EPSON Total Disc Monitor
What is EPSON Total Disc Monitor?
EPSON Total Disc Monitor is software for displaying the product’s current status, remaining ink, job information, and
other information. You can also pause/cancel jobs or change the order of jobs to be processed.
Starting EPSON Total Disc Monitor
1
Click [Start] ( in Windows 7 or Windows Vista) - [All Programs] (or [Programs]) -
[EPSON Total Disc Maker] - [EPSON Total Disc Monitor].
2
When more than one unit is connected, select the product for which to display the status,
and click [OK].
EPSON Total Disc Monitor starts.
To start EPSON Total Disc Monitor, you need to register this product after the installation.
See page 32 in this guide, and then register this product.
You can also start EPSON Total Disc Monitor in the following ways:
• Click in EPSON Total Disc Maker/EPSON Total Disc Setup.
• Click [Start Total Disc Monitor] on the [Tools] menu in EPSON Total Disc Maker/EPSON
Total Disc Setup.
Note
s
Note
s