Epson DiscProducer PP-100N - Handling Stackers

21
Part Names and Functions
Handling stackers
Load the discs into the stacker. See “Loading discs” on page 83 in this guide. Or take out the published discs from the
stacker. (See “Taking out discs” on page 104 in this guide.) Handle the stacker as shown below.
Stacker 1/Stacker 2
Stacker 1 and Stacker 2 are the same. Handle them in the same way.
Remove
Gently lift and pull towards you to take out.
Attach
Line up the indentations and attach.
Stacker 1
Stacker 2