Epson DiscProducer PP-100N User Manual

144
Precautions for Transporting Your Product
When transporting your product, be sure to use the original box and protective materials to protect it from an impact
or the like. See the PP-100N Setup Guide for details on the handling of protective materials.
• Make sure that no discs remain inside the product.
• Never remove an ink cartridge currently in use. The print head may dry out, and
printing may become no longer possible.
• When attaching protective materials or transporting the product, do not tilt the
product or turn it upside down. Make sure that it is oriented horizontally.
• Be sure that the product is lifted by two people.
The weight of this product is approximately
25.0 kg. When this product is lifted, it should
be lifted on both sides by two people holding
the recesses on the sides as shown in the
illustration on the left. Holding any part other
than the ones indicated in the illustration on
the left when carrying the product may result
in damage to the product. In particular,
carrying the product while the disc cover, ink
cartridge cover, or Stacker 4 is open may
result in the product being dropped, or deformed and damaged.
Furthermore, when putting down this product, take care not to trap a finger between
the product and installation surface.
• When lifting this product, make sure that, for example, you sufficiently bend your knees,
and your posture is such that excessive stress is not placed on your body.
An unnatural posture when lifting the product may result in an injury, or the product
being damaged.
• When moving the product, do not tilt it 10 or more degrees in a forward or backward
direction, or a side direction.
The dropping or the like of the product may result in an accident.
• Do not place a heavy object on the top of the product.
Subjecting this product to excessive force may result in a malfunction.
However, it is possible to place one unit of this product on top of another. In such a
case, make sure the tops and bottoms are oriented the same, and the exterior of the
units are aligned. At the same time, take sufficient care to prevent a unit from dropping
or falling. Also, do not place more than one unit on top of another.

Epson DiscProducer PP-100N Specifications

General

Capacity	50 discs
Interface	Ethernet
Product color	Black, Grey
Printing colors	Black, Cyan, Light cyan, Light magenta, Magenta, Yellow
Country of origin	China
Quantity per pack	1 pc(s)
Media types supported	CD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL
Optical disc diameter	120 mm
Publishing speed (CD)	30 discs/hour
Publishing speed (DVD)	17 discs/hour
Number of CD/DVD drives	2
Compatible operating systems	Windows 7, Windows 8 (32/64 bit), Windows Server 2003 (32/64bit), Windows Server 2008 (32/64bit), Windows Server 2012 (64bit), Windows Vista, Windows XP
Print speed (speed mode)	60 discs/hour
Print speed (quality mode)	42 discs/hour
Print resolution (speed mode)	1440 x 1440 DPI
Print resolution (quality mode)	1440 x 720 DPI
CD write speed	40 x
DVD-R write speed	12 x
Ethernet LAN (RJ-45) ports	1
Ethernet LAN	Yes
Pallet width	800 mm
Pallet height	1011 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	6 pc(s)
Quantity per pallet layer	2 pc(s)

Weight and Dimensions

Package depth	725 mm
Package height	525 mm
Package weight	29200 g
Dimensions (WxDxH)	730 x 530 x 522 mm