EasyManuals Logo

Epson DiscProducer PP-100N User Manual

Epson DiscProducer PP-100N
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
156
Password problems
Other problems
Symptom/Problem
Status
Check/Remedy Procedure
User name or password
cannot be used.
Were the user name or password entered incorrectly?
Enter the correct user name and password. These entries are case sensitive.
You forgot the password Please ask the administrator to change the password.
Symptom/Problem Status Check/Remedy Procedure
Cannot install software Is there enough available HDD space?
The software cannot be installed unless there is at least 10 GB of
available HDD space. Check the amount of available HDD space,
and if there is not enough space, increase the amount of available
space.
Available HDD space needs to be enough to enable the software to
run normally.
See “Software operating requirements” on page 25 in this guide.
Are you logged on to Windows with a “computer administrator”
account (user with administrator privileges)?
When installing the software, log on as a user with administrator
privileges (belonging to the administrator group). The software cannot
be installed if you log on with user privileges. In Windows 7, Windows
Vista, or Windows Server 2008, you may be asked for an administrator
password or confirmation. When asked for a password, enter the
password to proceed with operation.
The EPSON Total Disc Net
Administrator login screen is
not displayed.
Is the power of the product turned off?
Turn on the power of the product.
Is the product connected to the network correctly?
Check that this product and the client computer are connected
correctly to the network.
Is the correct address entered?
Check that the IP address, host name, or FQDN of the product was
correctly entered in the Internet Explorer address bar.
The drive cannot be used. Is use of the drive stopped?
When a write error occurs based on a preset retry write count, use of
the drive is automatically stopped, and [Drive operation paused DRV
1/2] is displayed on the LCD. Setting Output Devices in the PP-100N
Administrator’s Guide for the drive use restarting procedure.

Table of Contents

Other manuals for Epson DiscProducer PP-100N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson DiscProducer PP-100N and is the answer not in the manual?

Epson DiscProducer PP-100N Specifications

General IconGeneral
Capacity50 discs
InterfaceEthernet
Product colorBlack, Grey
Printing colorsBlack, Cyan, Light cyan, Light magenta, Magenta, Yellow
Country of originChina
Quantity per pack1 pc(s)
Media types supportedCD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL
Optical disc diameter120 mm
Publishing speed (CD)30 discs/hour
Publishing speed (DVD)17 discs/hour
Number of CD/DVD drives2
Compatible operating systemsWindows 7, Windows 8 (32/64 bit), Windows Server 2003 (32/64bit), Windows Server 2008 (32/64bit), Windows Server 2012 (64bit), Windows Vista, Windows XP
Print speed (speed mode)60 discs/hour
Print speed (quality mode)42 discs/hour
Print resolution (speed mode)1440 x 1440 DPI
Print resolution (quality mode)1440 x 720 DPI
CD write speed40 x
DVD-R write speed12 x
Ethernet LAN (RJ-45) ports1
Ethernet LANYes
Pallet width800 mm
Pallet height1011 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet6 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Package depth725 mm
Package height525 mm
Package weight29200 g
Dimensions (WxDxH)730 x 530 x 522 mm

Related product manuals