129
Maintenance
Checking the print head nozzles
If the print head nozzles are clogged, the printing may be faint even though there is ink, or unusual colors may be
printed. The nozzle check prints a pattern for checking the status of the nozzles, and you can check if the nozzles are
clogged by looking at this pattern.
How to perform a nozzle check
There are the following two ways to run a nozzle check.
• Run it using a PC
• Run it using the control panel on the product
Running it from a PC
1
Turn the product on.
2
Set one unprinted disc into Stacker 1.
3
Display the setting screen of the printer driver.
See “Displaying the printer driver screen” on page 60 in this guide for display procedure.
4
Click [Nozzle Check] in the [Utility] screen.
Then, follow the on-screen instructions.
The disc on which the nozzle check pattern was printed is output to Stacker 3 or Stacker 4.
See “Checking the nozzle check results” on page 131 in this guide for how to check the nozzle check results.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
